Diagnostic X-ray With Manual Tilting Table - Diagnostic X-ray With Manual Tilting Table Exporter, Manufacturer, Service Provider & Supplier, Delhi, India

Product Code : 01

Product Specification

Diagnostic X-ray With Manual Tilting Table
Medilux 300 - these are designed to fulfill the requirement of all Radiography, Fluoroscopy, Spot Filming and special procedures with manual or motorized tables. The generator is suitable for use with Image Intensifier TV systems.

Ergonomic Design Features

Single Phase (2 Pulse) X-Ray Generator, Maximum Rating 300 mA at 100 kVp (24KW) as per IS 7620:1986
Sleek Control console with Digital Display of mA, mAs & kVp
High Voltage Silicon Rectifiers for consistent results and low system losses.
Instantaneous Tube Overload Protection
Spot filming possible on all mA stations
Compatible with BEL DRA-1/25/20/40 X-Ray Tube

Controls

Line Switches: ON & OFF push button switches
Voltage Compensator Switch: A 15 way switch compensate voltage in the range 180 to 250 volts.
Major kVp Control: A 12 position switch for coarse selection of kVp. (Approx. 10 kVp per step)
Minor kVp Control: A12 position switch enables selection of 1 kVp per step in range of 40 to 100 kVp.
Fluoroscopy kVp Selector: A12 position independent switch permits selection of fluoroscopy kVp values from 45 to 100 kVp in steps of 5 kVp.
Technique Control: 50 mA, 100 mA on Small Focus and 200 mA, 300 mA on Large Focus.
Tube Selector: A Toggle switch with 'F' & 'R' option selects undercouch or overcouch X-Ray tube.
Radiographic Timer: A 24 position switch permits exposure time selections from 0.02 to 10 seconds.
Fluoroscopic Timer: It limits fluoroscopic examination to an integrated time up to 5 minutes.
Fluoro mA Selector: Continuously variable fluoro mA knob permits selections of mA value from 0-3 mA.
Fluoroscopy Exposure Switch: Fluoro Test.

Indicators

Digital display of mA, mAS & kVp
Radiography / Spot Film exposure parameters.
Selected Focal Spot, X-Ray and Tube overload LED's Display Penal.
mA meter: Radiographic actual mA value is indicated on 0-350 mA analogue scale and actual fluoro mA value is indicated on 0-10 mA scale.

Power Line Requirement
Power Demand at rated output - Single Phase, 50 HZ, and 30 KVA. 3 Phase to single phase transformer is recommended Maximum allowable line resistance in 415 line is 0.5 Ohms.

Compatible With: Motorized or Manual Table, Spot Film Device and IITV

Other Products in 'Diagnostic X-Ray Systems ' category

Horizontal Bucky Table compatible with 60/500 mA	60mA,100KVp Light Mobile X-Ray Machine	X-Ray With Fluoroscopy Tilting Table	RF X-ray Machine With Motorised Table	Spot Film Device with 300/500 mA Units	Diagnostic X-ray Machine

View all products(12)

<< Back